Home » DIGITAL TOOLS » Digital Torque Wrench » ARM303-4A 1/2" Digital Angle Torque Wrench
ARM303-4A 1/2" Digital Angle Torque Wrench
ARM303-4A 1/2" Digital Angle Torque Wrench ARM303-4A 1/2" Digital Angle Torque Wrench ARM303-4A 1/2" Digital Angle Torque Wrench ARM303-4A 1/2" Digital Angle Torque Wrench ARM303-4A 1/2" Digital Angle Torque Wrench ARM303-4A 1/2" Digital Angle Torque Wrench
ARM303-4A
1/2" Digital Angle Torque Wrench
 
Features

● 720 degree maximum angle measure.
● Torque range: 12.5 - 250.7 ft-lbs.
● LCD Backlight display.
● 30 data sets of memory capacity.
● 72 Gear teeth.
● Standard functions: torque setting, measurement setting, mode setting.
● Operation in both clockwise and counter-clockwise directions.
● LCD display shows kg-cm, N-m, in-lb, ft-lb measurements.
● Audible torque confirmation by means of buzzer.
● Easy to set up Peak or Trace modes.
● Anti-slip soft grip.

 
 Flyer Pdf
  ARM3xx Torque Wrench User Manual
  FAQ
Specifications
Model Number ARM303-4A
Drive 1/2" Square
Head Type Qick Release Ratchet
Gear Teeth 72
Length 26-1/4" (666 mm)
Accuracy CW ± 1.5%; CCW ± 2.5%
Measured Torque Range 12.5 - 250.7 ft-lbs (17 - 340 Nm)
Resolution 1 kg-cm, 0.1 N-m, 1 in-lb, 0.1 ft-lb
Auto Shut-Off After 2 Minutes of No Use
Operation Temperature -10 - 60°C
Storage Temperature -20 - 70°C
Battery AA Alkaline Battery x2
Tool Weight 3.06 lbs (1.39 kg)
 
Resources
 
 
 
Accessories (Optional)
 
 
 

 


Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Continue
Copyright © 2012 Mobletron Electronics Co., Ltd. All Rights Reserved.
ACDelco, ACDelco Emblem and the ACDelco related graphics are General Motors Trademarks used under license to Mobiletron Electronics Co., Ltd.